Acteon Equipment sales & rental Electronics & Tooling ROV ToolingROV / Survey Tools
ROV / Survey Tools
Return to ROV ToolingX Products selected
J2 Subsea ROV Nav Extender
The ROV Nav extender is designed to allow the rov nav to be extended above the vehicle and retract in a dead sub scenario.
- 300mm extension
- Single acting
- Spring return
Lateral FlexiCal
FlexiCAL is an ROV mounted caliper that allows for direct measurements from point to point with instantaneous readout.
Accurate live measurements give the client the knowledge to make decisions regarding their assets as the measurements are taken. No more post processing!
Results are accurate to ±0.1 mm and highly repeatable. The standard measurement range is 0-550mm, but the caliper can be equipped with extenders and blades tailored to suit the customer need.
The caliper is frequently used for measuring wear and corrosion on mooring chain, but also performs excellently on flanges, plates, structures and any number of other subsea assets.
- Delivers accurate, repeatable, real-time measurements
- Adaptable blades enable measurement of complex geometry
- Results are instantaneous and repeatable to +/- 0.1mm
Specialist Offshore Pipetracker Retracter Frame
The Specialist Offshore Services pipe-tracker retractor frame / TSS 440 retractor frame design allows an ROV to retract a pipe-tracker to a vertical position. Thus facilitating easier launch and recovery.
The lightweight but robust design ensures the customer that no additional buoyancy is required when operating the TSS 440 ROV mounted frame.
The retractable pipe tracker frame consists of 2 arms, slid into 2 mounting brackets. Those mounting brackets are then mounted on to the side of the ROV. Specialist Offshore Services supplies the TSS 440 retractor frame with a hydraulic control panel. Although, some ROV’s will not require this.
A custom hydraulics control panel synchronises the cylinders. So to ensure that the up and down motion of each side stays level.
The mounting options are varied and easily customised to suit any ROV. The retractor is made for use with the standard acetyl square rod with cross section dimensions 38x51mm, that is usually supplied with the pipe tracker system.
A kit is provided to allow the user to use 50x50mm square cross section glass reinforced plastic (GRP). This does not suffer from bending as much as the standard acetyl rectangular section material which is normally supplied with the pipe tracker systems.
- Weight (each arm) : 32kg in air / 25kg in Sea Water
- Weight hydraulics panel: 4kg in air / 2kg in Sea Water
- Robust design
- Fully retractable for safe ROV deployment and recovery
- Suitable to fit on a range of different ROV’s
- Available for hire