Camera Booms and Pan & Tilts

The HLK-2150 Pan & Tilt is now considered to be one of the longest serving reliable units in service.

It’s unique slip ring and tilt action ensures the camera swept arc is kept to a minimum.

The HLK-2200 Camera Rotator is a derivative of the HLK-2150 Pan & Tilt using the same base section and camera mount clamp.

It has a very rugged shaft and is for use as a tilt or pan unit only. The redundant slip ring section, which normally drives the pan & tilt unit, can also be used as a high-pressure water jet-port when used as a cleaning head in pipe inspection, cutting and repair tools.

The HLK-4600 Camera Boom Arm has been designed for pipeline inspection work. Using a pair of these arms, pipelines of up to 36” can be easily inspected.

Its unique design allows the camera mount to stay at the same angle through the entire 120° of angular movement of the arm. The camera mount can be tilted through a 120°. The arm uses Hydro-Lek’s standard HLK-1300 hydraulic cylinders. This model can be upgraded to a pan & tilt very easily.

The HLK-4600 Camera Boom Arm has been designed for pipeline inspection work. Using a pair of these arms, pipelines of up to 36” can be easily inspected.

Its unique design allows the camera mount to stay at the same angle through the entire 120° of angular movement of the arm, without any adjustment. The camera mount can be tilted through a 120° and rotated through 360°. The arm uses Hydro-Lek’s standard HLK-1300 hydraulic cylinders and HLK-2150 Pan & Tilt.

The HLK-46000 Camera Boom Arm has been designed for pipeline inspection work. Using a pair of these arms, pipelines of up to 1metre can be easily inspected.

Its unique design allows the camera mount to stay at the same angle through the entire 135° of angular movement of the arm, without any adjustment. The camera mount can be tilted through 90° and rotated through 180°. The arm uses Hydro-Lek’s standard HLK-11060 hydraulic cylinders and HLK-2100 Mini Pan & Tilt.

Following the overwhelming success of the PT3636 Hydraulic Pan & Tilt Unit, Tritech have continued to improve the design characteristics offered and have released a new improved pan and tilt unit.

The Tritech PT3636-C Hydraulic Pan & Tilt Unit has been designed to eliminate a number of potential weak points that were identified on other hydraulic pan and tilt units. Designed to be rugged, compact and reliable the PT3636-C pan and tilt unit is the ideal solution for use on ROV’s, where the harsh working environment tests equipment reliability to the limit.

All hydraulic connections for the PT3636-C pan and tilt unit are located in the mounting base, which allows the unit to be installed using rigid rather than flexible piping. By using rigid piping the system offers reduced interference and smooth operation of underwater video cameras and lights, which in turn increases the efficiency and reliability of the pan and tilt unit.

The integral mounting bracket on the PT3636-C pan and tilt unit has been designed with practical slots for band clamps. This provides a simple method for mounting numerous combinations of different sized underwater video cameras and lights.

This stylishly designed compact hydraulic pan and tilt unit has been designed to work efficiently and reliably when mounted in a restricted area.

The Tritech PT3636-C hydraulic pan and tilt unit has been designed to eliminate a number of potential weak points that were identified on other hydraulic pan and tilt units.

Designed to be rugged, compact and reliable the PT3636-C is the ideal solution for use on subsea vehicles, where the harsh working environment tests equipment reliability to the limit.